Dedalination equipment intended for mass spec appearance
| Catchment unit | 1 square meter x2-sided x3 (Total surface area of 6 square meters) Power consumption: Max. 3kW |
|
| Performance | 200Litter/day Max. | Condition: Temperature 40℃, Humidity 98% |
| 73Litter/day | Condition: Temperature 20℃, Humidity 50% | |
|
* The rendering was created with CG. ►Details * Some parts are omitted. May be different from the mass-produced. |
||
| Item | Specifications | Note | ||
|
Main Body Specifications |
Catchment Block |
1 | 100×80×1,000(mm) | Basic unit |
| Material | 2 | Aluminum | ||
| Anti Rust | 3 | Anodized + special surface treatment (Composite layer) |
||
| Catchment unit | 4 | 1,000×80×1,000(mm) Catchment Block x 10 Combination products |
Smallest unit of product You can customize the unit height 100mm.(MTO) |
|
| Dimensions (Undetermined) |
5 | 1,000×150×H1,800(mm) 1,000x150x1,800(mm) *For 10 sets: 1,000×4,000×1800(mm) *Does not include accessory equipment |
Plus the necessary parts assembled products Easy to transport by truck scale |
|
| Weight (Undetermined) |
6 | * For 10 sets: Less than 500kg |
||
|
attached facilities |
Chiller | 7 | Per Unit: Approx. 1kW | *Require maintenance *Can be maintained by the user |
| Blower | 8 | Internal airflow: 12Littler/min. (per Unit) |
||
| Air blow system | 9 | Surface wind speed of Catchment unit: 3m/sec |
||
| Controller | 10 | Atmospheric temperature and humidity monitoring ON/OFF control |
||
| Tank | 11 | Capacity: Half-day | ||
|
General specification |
Source | 12 | Atmosphere | Atmosphere of free material is everywhere |
| To intake | 13 | Promote the condensation Air blow |
Natural phenomena and use sophisticated |
|
| Catchment volume |
14 | Catchment volume is up to you 12Litter/day(Per m2) *20℃ temperature and humidity at 50% *The variation in temperature and humidity |
Catchment per unit: 24Litter/day Adjustable volume Water collecting in low humidity place ▼See below |
|
| Water quality and taste |
15 | Like pure water, fresh water |
Equivalent stormwater | |
| Unit price of water |
16 | 0.8～1.4yen / Littler | Low price on a par with the general water |
|
| Endurance time | 17 | More than 30 years | Permanently available | |
|
Other specification |
Available area | 18 | All regions | Excludes extreme cold and dry land areas |
| Target Users | 19 | Recommend | Available to all users | |
| Transportation | 20 | Convenient & low-cost: Two method (1) Packed separately: Knockdown assembly (2) Embedded Container: Available only in deferring |
||
Line Up
| Minimum | Performance: Max. Approx. 73Litter/day(per Unit) |
for Residential |
| Standard | Performance: Max. Approx. 1,000Litter/day |
for Apartment |
| Middle | Performance: Max. Approx. 100,000Litter/day |
Large facilities ex. Large hospitals, Large farm |
| Large | “Middle model” and a lot of water intake based on multiple associative | |
| Special | Automotive, Marine, Building for the rooftop, as a powerful dehumidifier | |
| * The above “performance” is the value of the environment exert maximum capacity. *Temperature 40℃ Humidity 98% ▼See below |
||
Installation environment and Water collection
Can be used in low humidity area
Case-1:
Temperature40℃ Humidity25% (Wind speed 5m/s = Catchment speed x1.24)
Catchment volume: Approx. 0.55Litter/m2h x 1.24 x 2-sided x 24hours = Approx. 32.7Litter/day
Amount of water catchment in the case of 10 Units: Approx. 327Litter/day
Case-2:
Temperature35℃ Humidity15% (Wind speed 5m/s = Catchment speed x1.24)
Catchment volume: Approx. 0.3Litter/m2h x 1.24 x 2-sided x 24hours = Approx. 17.9Litter/day
Amount of water catchment in the case of 10 Units: Approx. 179Litter/day
* Please contact us for any questions.
Welcome! | Profile | Global water resources | World’s Oasis® > Specifications > Details > Recommend
for Investors | Order | Contact | Guide